Currencies:  

Straight Glass Stem Rod 18mm for Diffuser

$3.99

.
.
.
.
.
.
.

The head is 18mm and it fits to our stationary Diffuser or similar Diffusers in market, please check the second picture to address which part it is .

0- unplug the unit
1- remove the legs from the unit, 4 plastic legs
2- unscrew the screws underneath, and remove the plastic cover to have access to glass rod
3- lubricate the glass rod from both sides
4- push the glass rod out very gently from inside the unit, due to lubrication it must come off easily
5- make sure the metal heating element does not get damaged
6- lubricate the new arrived glass rod exterior
7- place the metal element inside the new arrived glass rod and push through the same hole that has silicone bushing.
8- close the base
9- test the unit on level surface

.
.
.

Add to Cart:

  • Model: StemGlassDif



Your IP Address is: 54.198.246.116